Application method of handheld steel bar bending machine:
1. This machine consists of a zigzag straightening head, oil pipes, and an electric hydraulic pump.
2. Before use, check whether the oil pipe and oil gauge are normal, then connect the quick connector to the quick connector on the zigzag straightening head, and smoothly place the steel bar in the front of the split zigzag machine module to ensure that it is ready for operation,
3. Turn on the switch, and at this point, the oil pump begins to operate. The output hydraulic oil is pressurized to 63Mpa with the addition of load. The push shaft moves forward, and the steel bars are twisted. When the push shaft reaches the appropriate position.
4. Please visually inspect the size of the zigzag viewpoint to achieve the desired viewpoint intention. When pressure reduction is required, rotate the manual valve handle. At the end of the operation, unplug the power supply and remove the quick connector.
Product Description
model |
voltage |
power |
Bending range |
Bending speed |
Net weight |
Gross weight |
ZJ-25 |
220v/110v |
1500w |
16-25mm |
3s-4s |
19kg |
26kg |
Operating instructions and precautions for handheld steel bar bending machine
1. Strictly abide by the safety operation regulations of machine tool workers and wear protective equipment according to the rules.
2. Before recommending, it is necessary to carefully check whether the motor, switch, circuit, and grounding are normal and robust, and check that all operating parts and buttons of the equipment are in accurate positions.
3. Check the overlap and stability of the upper and lower molds; Check if each positioning device meets the processing requirements.
4. Turn on the power, flip the switch on the control panel, and then suggest the oil pump.
5. It is recommended to work in idle mode for 5-10 minutes and move the upper slider 2-3 times at full stroke. If any abnormal dynamics or defects are found, the vehicle should be parked immediately and the defects should be cleaned. Only after all are normal can the operation be carried out